Diagnóstico, diseño e implementación de cubierta metálica en el laboratorio del centro de investigaciones de ciencias agropecuarias de la Universidad Técnica de Manabí-FASE I

Abstract

This work was carried out in the urban parish Lodana the Canton Santa Ana, in the laboratory of the Research Center of Agricultural Sciences of the Technical University of Manabi, in the form of community work entitled "Diagnosis, Design and Implementation of the cover metal Phase I "came to fruition to help develop you need this race because with this significant contribution is to improve teaching techniques and learning taught by teachers to students, while giving optimal comfort to students and teachers, besides encouraging future generations to contribute to the growth of the race. The first thing that was done was the recognition of the place and the existing roof to diagnose and thus make designing a new cover on architectural plans for construction, then its modeling in an applied software (SAP2000). To start building the new metal roof first began with the removal of the existing roof which was made of Eternit slab and what helped or gave advantage in clearing the deck. The embodiment of the tire was made of metal profiles 8cm * 3mm each profile having a length of 6 m. For this a 220 v electric welding was used, and solder C13 E 6011. Once completed what is the skeleton of the roof are fitted with a cover plate in the drawers, then proceeded to the placement Dipanel this It recommends placing material from the bottom up. At the time it was placing the Dipanel went also placing gutters. This system will cover implant or windbreak to the frieze around the edge of this to give a better appearance to the deck. Thanks to the strength of materials, allows profiles function as structural elements To make the implementation of materials metal roof made it through a grant from the Technical University of Manabi.