“PLAN DE MANEJO AMBIENTAL PARA LOS TALLERES DE ARTESANÍAS EN TAGUA DE LA ASOCIACIÓN TROPITAGUA, DEL SITIO SOSOTE, CANTÓN ROCAFUERTE, PROVINCIA DE MANABÍ”.

No Thumbnail Available
Authors
GALO ARTURO PERERO ESPINOZA
Journal Title
Journal ISSN
Volume Title
Tutor
Co-Tutor
Publisher
UNIVERSIDAD TÉCNICA DE MANABÍ.FACULTAD DE CIENCIAS MATEMÁTICAS, FÍSICAS Y QUÍMICA.CARRERA DE INGENIERÍA INDUSTRIAL.
Campo Amplio
Campo Espec�fico
Num. P�ginas
Date
2017-10
Abstract
El presente trabajo de titulación tiene la finalidad de contribuir con un Plan de Manejo Ambiental (PMA) para los talleres de la asociación Tropitagua del sitio Sosote, los cuales elaboran artesanías a base tagua (Phytelephas aequatorialis), éste plan es una herramienta que brindará las directrices adecuadas para gestionar correctamente los contaminantes (desechos, residuos, ruido, aguas residuales, entre otros) generados por la actividad que implica la elaboración de artesanías en tagua y de esta manera evitar impactos ambientales ocasionados al medio. En el capítulo primero se puede evidenciar la descripción y formulación del problema siendo el punto de partida para el desarrollo de la investigación que se propuso realizar. En el segundo capítulo se encuentran definidos los conceptos básicos para entender la propuesta de investigación, mismos que se originan a partir de las variables identificadas. En el capítulo tercero se desarrolló la metodología que se aplicó para llevar a cabo la investigación definiéndose el alcance del estudio y sus aportes al ámbito económico, social y científico, también se plantearon el método, las técnicas y los instrumentos necesarios para lograr el cumplimiento de los objetivos propuestos en éste mismo capítulo. En el capítulo cuarto se encuentra el desarrollo de la propuesta de investigación es decir el PMA, en la primera parte de este plan se establecen los datos básicos como información general, objetivos del PMA y alcance, seguidamente se presenta el marco legal ambiental el cual recoge algunos artículos de leyes y normativas que sustentan el presente PMA. En la segunda parte se define la ficha y la línea base ambiental donde se describen las características de la zona de influencia en estudio. A continuación se hace una breve descripción de la asociación de artesanos Tropitagua, lo que incluye todas las materias primas, materiales, insumos, herramientas, equipos y proceso de elaboración de artesanías en tagua. Para tomar las medidas adecuadas se realizó una matriz de identificación riesgos y contaminantes ambientales que se generan en los talleres, además de un diagnostico que incluye mediciones de ruido y análisis de las aguas residuales que se generan en el proceso de tinturación de la tagua. XV En la última parte del PMA se puede observar los programas con sus respectivas medidas adoptadas a partir del diagnóstico realizado y la situación de cada taller, cada programa incluye además sus objetivos, procedimientos, tiempo de ejecución, responsables, indicadores de cumplimiento, costos y seguimiento. Por último se presenta el presupuesto de inversión para la implementación del PMA en cada taller de la asociación. En el quinto capítulo del presente trabajo que trata sobre la presentación de los resultados, previamente se analizan los datos obtenidos con la aplicación de una encuesta a los trabajadores y propietarios de los talleres, seguidamente se realiza la verificación de los objetivos del trabajo de titulación y también se presentan las conclusiones y recomendaciones.
Description
The present degree work has the purpose of contributing with an Environmental Management Plan (EMP) for the workshops of Tropitagua association from the Sosote site, which elaborate handicrafts based on tagua (Phytelephas aequatorialis), this plan is a tool that will provide the appropriate guidelines To manage correctly the contaminants (waste, residues, noise, waste water and others) generated by the activity that involves the production of handicrafts from tagua and in this way avoid environmental impacts. In the first chapter the description and formulation of the problem can be evidenced being the starting point for the development of the research that was proposed to carry out. In the second chapter are defined the basic concepts to understand the research proposal, which originate from the variables identified. In the third chapter, the methodology that was used to carry out the research was developed, defining the scope of the study and its contributions to the economic, social and scientific fields. The method, techniques and instruments necessary to achieve the objectives proposed in this chapter. In the fourth chapter is the development of the EMP research proposal. In the first part of this plan the basic data are set out as general information, EMP's objective, background and scope, then the environmental legal framework is presented, which contains some articles of laws and regulations that underpin the present EMP. The second part defines the file and the environmental baseline describing the characteristics of the influence area under study. Below is a brief description of Tropitagua craftsmen association, which includes all raw materials, materials, supplies, tools, equipment and process of craftsmanship made from tagua. In order to take appropriate measures, a risks identification matrix and environmental contaminants generated in the workshops was carried out, in addition to a diagnosis that includes noise measurements and analysis of the wastewater generated in the dyeing process of tagua. In the last part of the EMP, programs can be observed with their respective taken measures based on the diagnosis made and the situation of each workshop. Each program also includes its objectives, procedures, execution time, responsible, compliance indicators, costs and follow-up. Finally, the investment budget for the EMP implementation is presented in each workshop of the association. XVII In the fifth chapter of the present paper that deals with the presentation of the results, previously were analyze the data obtained with the application of a survey to the workers and owners of the workshops, followed by verification of the objectives of the degree work and conclusions and recommendations are also presented.
Keywords
Manejo Ambiental, ARTESANÍAS EN TAGUA
Citation
CEDEÑO TRIVIÑO KELVIN LUIGGI.MUÑOZ VALENCIA JAZMIN NATALI.(2017).PLAN DE MANEJO AMBIENTAL PARA LOS TALLERES DE ARTESANÍAS EN TAGUA DE LA ASOCIACIÓN TROPITAGUA, DEL SITIO SOSOTE, CANTÓN ROCAFUERTE, PROVINCIA DE MANABÍ.FACULTAD DE CIENCIAS MATEMÁTICAS, FÍSICAS Y QUÍMICA.UNIVERSIDAD TÉCNICA DE MANABÍ.Portoviejo.141p.
Enlace revista