"Asesoramiento para la implementaciòn de comederos y bebederos en una granja porcina en las nuevas instalaciones de área de producción de Ciencias Veterinarias en el cantón Santa Ana parroquia Lodana "

dc.contributor.author Pin Molina, Erick Joselo
dc.date.accessioned 2020-09-23T21:33:39Z
dc.date.available 2020-09-23T21:33:39Z
dc.date.issued 2020
dc.description El presente trabajo comunitario se realizó en el Centro Experimental de Medicina Veterinaria Fase 2 de la Facultad de Ciencias Veterinarias de la Universidad Técnica de Manabí en la Parroquia Lodana del Cantón Santa Ana, como objetivo principal es el asesoramiento técnico para la implementación de comederos y bebederos con la finalidad de aplicar las normas establecidas para el bienestar animal, y así propiciar un mejor manejo y proceso del ciclo productivo de los cerdos. Esta metodología se realizó mediante el marco lógico y de la matriz involucrada para la implementación de diferentes tipos de comederos y bebederos lo cual tuvo una duración de 4 meses; quedando así la primera fase se diseñó y se construyó el comedero tipo canoa en el área de cubrición y control con medida de 10x50m2 y en el área de verraco también tipo canoa con medidas de 75x50m2, en el área de destete/transición se instalaron tipos de comederos marca mvd-10kg en las 8 divisiones con medidas de 62 cm de altura, 54 de ancho y en el área de maternidad tipos mvl-g1 con medidas 40 cm de alto, 35 cm de ancho y 40 cm de fondo y para los lechones se incorporaron 8 comederos iniciadores con 5 compartimientos, 24 cm de diámetro; en la segunda fase se realizó las instalaciones de tuberías galvanizadas, plásticas y los bebederos, en el área de cubrición y control se instaló tubo galvanizados de 70cm a lo largo del comedero en las 15 divisiones y sus respectivos bebederos tipo pico de pato; en el área del verraco se colocó un bebedero tipo pico de pato; en el área de destete/transición se colocaron dos tipos de bebederos tipo pico de pato y chupete pulverizador en las 8 divisiones con una altura de 30cm desde el piso slats; en el área de maternidad se instaló dos tipos de bebederos chupetes pulverizadores en las 8 divisiones con una altura de 35 cm para madres y 20 cm para lechones; seguidamente se instaló 3 tanques plásticos de capacidad de 220 lt con sus respectivos accesorios en las tres áreas que serán utilizados para sus respectivos tratamientos a los animales. Al termino al asesoramiento para la implementación de comederos y bebederos es de gran beneficio para involucrar en el eje práctico a los estudiantes que son beneficiarios directo de dicha obra lo cual permite el correcto funcionamiento y manejo de las diferentes áreas porcinas que se encuentra en el Centro Experimental de Medicina Veterinaria Fase 2 así destacando los principales parámetros que garanticen el bienestar animal. es_ES
dc.description.abstract The present community work was carried out in the Experimental Center of Veterinary Medicine Phase 2 of the Faculty of Veterinary Sciences of the Technical University of Manabí in the Lodana Parish of the Santa Ana Canton, as the main objective is the technical advice for the implementation of feeders and drinking troughs in order to apply the standards established for animal welfare, and thus promote better management and process of the productive cycle of pigs. This methodology was carried out through the logical framework and the matrix involved for the implementation of different types of feeders and drinking fountains which lasted 4 months; leaving the first phase, the canoe feeder was designed and built in the area of coverage and control with a measure of 10x50m2 and in the area of boar also canoe type with measures of 75x50m2, in the weaning / transition area types of mvd-10kg brand feeders in the 8 divisions with measures 62 cm high, 54 wide and in the maternity area types mvl-g1 with measures 40 cm high, 35 cm wide and 40 cm deep and for piglets 8 starter feeders were incorporated with 5 compartments, 24 cm in diameter; In the second phase, galvanized, plastic pipes and drinking fountains installations were carried out, in the area of coverage and control, 70cm galvanized pipes were installed along the feeder in the 15 divisions and their respective duckbill type drinking troughs; in the boar area a duckbill type trough was placed; In the weaning / transition area, two types of duckbill type and spray pacifier were placed in the 8 divisions with a height of 30cm from the slats floor; In the maternity area, two types of spray drinking troughs were installed in the 8 divisions with a height of 35 cm for mothers and 20 cm for piglets; 3 plastic tanks with a capacity of 220 lt were installed with their respective accessories in the three areas that will be used for their respective treatments to the animals. At the end of the advice for the implementation of feeders and drinking troughs it is of great benefit to involve in the practical axis the students who are direct beneficiaries of said work which allows the correct operation and management of the different pig areas that are located in the Center Experimental of Veterinary Medicine Phase 2 thus highlighting the main parameters that guarantee animal welfare. es_ES
dc.description.sponsorship Dr. Juan Pauta Labanda, MSc. es_ES
dc.identifier.uri http://repositorio.utm.edu.ec/handle/123456789/1464
dc.language.iso es es_ES
dc.publisher Facultad de Ciencias Veterinarias > Carrera de Medicina Veterinaria es_ES
dc.relation.ispartofseries FCVTG;MVZ2020/0475
dc.subject Asesoramiento,implementacion,comederos,bebederos,granja,porcina. es_ES
dc.title "Asesoramiento para la implementaciòn de comederos y bebederos en una granja porcina en las nuevas instalaciones de área de producción de Ciencias Veterinarias en el cantón Santa Ana parroquia Lodana " es_ES
dc.type Thesis es_ES
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Infor Trab Titul.pdf
Size:
1.51 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: