“ASESORAMIENTO TÉCNICO PARA IMPLEMENTACIÓN DE UN SISTEMA DE RIEGO POR ASPERSIÓN I FASE EN EL DEPARTAMENTO DE PRODUCCIÓN ANIMAL DE LA FACULTAD DE CIENCIAS VETERINARIAS, EN LA PARROQUIA LODANA DEL CANTÓN SANTA ANA EN EL AÑO 2016”

dc.contributor.author García Guillen, Anthony Alejandro
dc.date.accessioned 2017-10-04T04:33:24Z
dc.date.accessioned 2017-10-04T04:33:40Z
dc.date.available 2017-10-04T04:33:24Z
dc.date.available 2017-10-04T04:33:40Z
dc.date.issued 2017
dc.description The present project describes the technical advice provided for the implementation of a sprinkler irrigation system in the new facilities of the Faculty of Veterinary Sciences, located in the parish of Lodana, Santa Ana, Manabi Province, Ecuador. It was advised the execution of an electric line to feed the irrigation pump, as well as to place 4 concrete poles located at a distance of 50 meters each with their respective insulators and tensioners, in addition it was suggested the construction of a booth of Rod of a millimeter of diameter to locate the pump of irrigation and the control panels. To give current to the pump, a starter with a breaker system was installed with two indicator lights that measure if the pump is running or if there is an overcurrent. In addition, it was recommended to connect an absorber and the pipes to the pump and a self-priming system was installed in case the check runs out of water to meet the technical requirements of the proper functioning of the sprinklers in the irrigation. es_ES
dc.description.abstract El presente proyecto describe el asesoramiento técnico brindado para la implementación de un sistema de riego por aspersión en las nuevas instalaciones de la Facultad De Ciencias Veterinarias, ubicada en la parroquia Lodana, cantón Santa Ana, Provincia de Manabí, Ecuador. Se asesoró la ejecución de un tendido eléctrico para alimentar a la bomba de riego, así como también para colocar 4 postes de hormigón ubicados a una distancia de 50 metros cada uno con sus respectivos aisladores y tensores, además se sugirió la construcción de una caseta de varilla de un milímetro de diámetro para ubicar la bomba de riego y los tableros de control. Para dar corriente a la bomba se procedió a colocar un arrancador con sistema de breaker con dos luces indicadoras que miden si la bomba está en marcha o si hay sobrecorriente. Además se recomendó la conexión de un absorbente y las tuberías a la bomba y se colocó un sistema autosebante en el caso de que el cheque se quede sin agua para cumplir con los requisitos técnicos del buen funcionamiento de los aspersores en el riego. es_ES
dc.identifier.citation 1. (Alarcón, 2014) Scielo, Revista Ciencia Técnicas Agropecuarias, Por Roberto Alarcón, publicado en junio del 2014, recuperado el 18 de septiembre del 2016. 2. http://scielo.sld.cu/scielo.php?script=sci_arttext&pid=S2071005420 14000200007 3. HERRERA, J.; T. LÓPEZ; F. GONZÁLEZ: Sobre el uso del agua en la agricultura cubana. Revista Ingeniería Agrícola, 1 (1): 3-7, 2012. 4. (Ríos, 2011) Arcadio Ríos. Máquinas agrícolas, tracción animal e implementos manuales. Instituto de Investigaciones de Ingeniería Agrícola. La Habana, 2011. 5. https://www.ecured.cu/Riego_por_Aspersi%C3%B3n 6. (Will, 2012) Sistema de Riego por aspersión, surcos y goteo, por Will, publicado el 11 de junio del 2012, recuperado el 18 de septiembre del 2016. es_ES
dc.identifier.uri http://repositorio.utm.edu.ec/handle/123456789/1059
dc.publisher Universidad Tecnica de Manabi , Facultad de Ingenieria Agricola,Carrera de Ingenieria Agricola es_ES
dc.subject RIEGO es_ES
dc.subject ASPERSP es_ES
dc.title “ASESORAMIENTO TÉCNICO PARA IMPLEMENTACIÓN DE UN SISTEMA DE RIEGO POR ASPERSIÓN I FASE EN EL DEPARTAMENTO DE PRODUCCIÓN ANIMAL DE LA FACULTAD DE CIENCIAS VETERINARIAS, EN LA PARROQUIA LODANA DEL CANTÓN SANTA ANA EN EL AÑO 2016” es_ES
dc.type Thesis es_ES
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
W1 tesis anthony (1).pdf
Size:
1.88 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: